Free Standing Intelligent Controller Air To Water Heat Pump With Stainless Steel Shell

Meeting Air source heat pump High efficient saving energy Machine water heater

Free Standing Intelligent Controller Air To Water Heat Pump With Stainless Steel Shell

Technology Specification , Air source heat pump

1.DESCRIPTION

Heat pump collect heat from air by 20℃ below the refrigerant and Compress heat into high temperature and

high pressure refrigerant, and then passed through the heat transfer to the need to be heated water or other

media,electricity is the transport of porters.so that the heat pump Efficiency(COP)reaches 400-

500%.Compare with 90% of heat from electricity,60% of the heat from natural gas and fuel,35% of heat from

coal,heat pump are even more energy efficient than solar energy.

QC:

1. Complying with ISO standard. Quality Ensured.

2. Complete Inspection for each unit before out of factory, covering water system and electricity detection and testing, ensuring 100% right product before shipment.

3. Strict quality control during production. We have liquid soap detection, halogen detection, electrical detection and water-soaking detection during production to avoid gas leakage and electrical problems.

4. Full inspection on bigger parts such as compressors, condensers, evaporators, expansion valves, flow switches, controllers etc. Selection inspection for small parts such as sensors, pressure switches etc.

5. Well noise control by using mute cotton for casing plates and soft rubber feet for floating compressors, some of the models use compressor isolation shields.

6. Well insulated with insulated cotton for every pipe and parts, include compressor, dryer filter and each pipes.

7. We have passed TUV and SGS inspections. We have CE, Ro HS, IEC, CCC, CB certificates for most of our products. Some of our products have en14511 test, en14825 test.

A. Payment service

1. T/T

2. L/C (for container order only)

B. Technical service

1. We calculate the capacity and recommend the best models.

2. We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.

3. We supply the spare parts and technical support in and after the warranty time.

4. We supply the training course to your workers at our factory if you need.

5. We can offer site training to your workers in your place which is negotiable.

C. After-sales service

1. Technical support for your installation, operation and maintenance.

2. Standard warranty time: One years’warranty for heat pumps

You can also pay for extended warranty or we can renegotiate the longer warranty period.

1. Spare parts and technical support at most economic prices after the warranty.

FAQ

Q1. Can I have a sample order for Heat pump or Water tank?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A: Sample needs 3-10days, mass production time depend on the products' quantity.

Q3.Do you offer guarantee for the products?

A: Yes, 12 months since the heat pump depart from the port of loading (Refer to the Bill of Lading).

Certificate we have got :

1> ISO 9001, ISO 14000

2> Our company has been inspected and certificate by EMC

3> CE And EN14511, EN 14825-ERP for heat pump exported to Europe

4> Energy label for all heat pump models sold to over sea market

5> Testing laboratory calibrated by CNAS

Meeting heat pump Main parts :

MD30D Air source heat pump parameters tables