Guangzhou Jin Lun Electric Equipment Co.,Ltd
19 Years Professional Heat Pump Manufacturer!
Add to Cart
Multifunctional Heat Pump Integrating Refrigeration, Heating, Dehumidification and Constant Temperature Fresh Air
Three in one pool heat pump, 6 functions:
| 1. Dehumidity
|
| 2. Fresh air
|
| 3. Constant temperature
|
| 4. Space heating & cooling
|
| 5. Initial temperature rise
|
| 6. Bathing
|
Parameters and Installation
| Rated voltage: 380V | Rated water temperature: 28 ° C |
| Rated frequency: 50Hz | Maximum water temperature: 38 ° C |
| Rated current: 72A | Interface size DN: 75 flange mm |
| Rated pressure: 0.4Mpa | Compression power: 21KW |
| Water flow: 28000L/H | Fan power: 8KW |
| Noise: 60Db | Fresh air motor: 0.32KW |
| Total input power: 29.32KW | Dehumidification capacity: 100L/H |
| Heating capacity: 120KW | Air volume of the blower: (8437~13617) m3*2pcs |
| Cooling capacity: 85KW | Blower full pressure: (805~868) Pa*2pcs |
| Blower voltage: 380V | Static pressure of the blower: (744~708) Pa*2pcs |
| New fan voltage: 380V | Fresh air volume: 1500~3000m3 |
| New fan full pressure: 266~245Pa | New fan static pressure: 219~145Pa |
| Throttling element: thermal valve | Condenser: pure titanium tube heat exchanger or naval copper |
| Evaporator: High-efficiency internally threaded tube is connected with hydrophilic aluminum fins | |
| External condenser: air-cooled (water-cooled can be customized) | |
| Control system: with multiple parameter setting and query functions, multiple fault protection and alarm functions | |
| Size and Packing: Machine size (length * width * height): 4000 * 2260 * 2160mm | |
Product discrition:
Heat pump used the heat from the air -20℃ below the cold coal recovery after compressed into a high temperature and high pressure refrigerant, it needs to be heated by heat transfer of water or other medium, make the heat efficiency of 400-500%.
A. Payment service
1. T/T, 30% deposit, 70% balance before shipment.
B. Technical service
1. We calculate the capacity and recommend the best models.
2. We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3. We supply the spare parts and technical support in and after the warranty time.
4. We supply the training course to your workers at our factory if you need, we can also offer site training.
5. We welcome you to be our partner.
C. After-sales service
1. Technical support for your installation, operation and maintenance.
2. Standard warranty time: One years’warranty for heat pumps
You can also pay for extended warranty or we can renegotiate the longer warranty period.
3. Spare parts and technical support at most economic prices after the warranty.
FAQ
Q1. Can I have a sample order for Heat pump or Water tank?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: Sample needs 3-10 days, mass production time depend on the products' quantity.
Q3.Do you offer guarantee for the products?
A: Yes, 14 month since the heat pump left our factory.
Certificate we have got :
| 1> ISO 9001, ISO 14000 |
| 2> Our company has been inspected and certificate by EMC |
| 3> CE And EN14511, EN 14825-ERP for heat pump exported to Europe |
| 4> Energy label for all heat pump models sold to over sea market |
| 5> Testing laboratory calibrated by CNAS |
Our leading products
Air to water heat pump, Water chiller, Inverter heat pump, High water temperature heat pump.
Mono block house heating heat pump, Split heat pump, Super low noise heat pump.
Heat pump dryer, Ground source heat pump, water to water heat pump, swimming pool heat pump.