Guangzhou Jin Lun Electric Equipment Co.,Ltd
19 Years Professional Heat Pump Manufacturer!
Add to Cart
Domestic hot water heating project heat pump unit heat pump room heater heat pump
==========================
Contact:Swallow | Heat Pump Professional Provider
Mobile/Wechat: +86 13699735517
Email:meeting12@heatpumpchina.com
==========================
Product Parameters
| Heating capacity: 15KW Water production: 350L/h Rated power: 3.78 KW Rated current: 15A Rated water temperature: 55 ° C Maximum water temperature: 60 ° C Voltage / frequency: 220/50V / Hz | Noise: ≤55Db(a) |
| Remarks:The test conditions of above parameter :dry bulb temperature :20℃,wet bulb temperature :17℃, Inlet water temperature 15 degree , Outlet water temperature 55 degree | |
Advantages of the unit:
The waste water source heat pump mainly uses bath waste water as the heat source for extracting energy.
With the help of the cyclic change of refrigerant state inside the waste water source heat pump unit system,
it absorbs heat from waste water at the waste water end and then transfers it to tap water or well water,
only consuming a small amount of electric energy, thus achieving an innovative technology for heating tap water to above 60 degrees.
The direct heat exchange waste water source heat pump pumps waste water directly into the heat pump unit for heat exchange,
with high heat exchange efficiency.
ABOUT US
1). We were established in 2001.
2).We are a professional heat pump manufacturer,Located arround baiyun Air port
3). We are trading on Meeting Brand ,Meeting heat pump Well-know brand we operate in Europe market
4). Our company has been inspected and certificated by TUV and SGS.
5). We are the one of the first manufacturers whose heat pumps are with top COP gaining grants from Chinese government.
6). We pass ISO9001 quality management system and ISO14000 environment protection system
7). Our testing laboratory can test heat pump up to 60KW heating capacity and create testing air temperature condition during -25DegC~45DegC,according to EN14511 standard.
9). Our leading products: Air to water heat pump , DC inverter heat pump, High water temperature heat pumps
Monoblock house heating heat pumps ,Split heat pump ,Super low noise heat pump
Heat pump dryer ,Ground source heat pump , water to water heat pump , swimming pool heat pump
Inverter basic information
Meeting inverter heat pump is the ideal solution for house heating and hot water so far , with advanced inverter technology , saving 40 % electricity than normal on / off heat pump in practical operation . The whole system is optimized with variable fan speed , while the temperature compensation function contributes to a more comfortable indoor environment . It can work with solar, boiler or electric heater according to practical condition of the heating system .
Mian Abvantage:
1 . With Advanced inverter technology , it saves 40 % energy than normal heat pump in practical operation.
2 . Manage heating , cooling and hot water , fits your need all year round .
3 . With temperature compensation function , the water setting temperature adjusts automatically as the
house's heat loss changes
4. Automatically variable fan speed to optimize heating efficiency .
5. Can work with room thermostat or master controller .
6. Can work with auxiliary heater .
7. Split design with water system indoor, preventing water frozen problem.
8. Easy wire connection , simplifies installation and avoids mistakes .
9. With controller interface , plate heat exchanger , circulation pump , flow switch , water pressure gauge in indoor unit .
10. Allows absence of buffer tank.
B. Technical service
1. We calculate the capacity and recommend the best models.
2.We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3. We supply the spare parts and technical support in and after the warranty time.
4. We supply site training or training course to your workers at our factory if you need.
C. After-sales service
1. Technical support for your installation, operation and maintenance.
2. Standard warranty time: One years’warranty for heat pumps
You can also pay for extended warranty or we can renegotiate the longer warranty period.
3. Spare parts and technical support at most economic prices after the warranty.
Packaging & Shipment
1> Meeting heat pump can sure delivery heat pump within 5~20 working days as we warehouse stock condition.
2> Heat pump with strong plywood pallet , strong plywood box for loading, make sure no problem happen during rude transporattion .
3> All spare parts of the heat pump water heater will together loading into package , one time finished shipment to buyer.
4> Take video of the heat pump for buyer before package to 100% sure buyer get product same as order, no any different.
5> Meeting heat pump offer 100% test online, 5% test in Lab by 24 hour for one lot order (if not new model).
Packaging Details :Standard export packing -with plywoods case packages,OEM is available for Factory price heat pump water heaters
Delivery Time :15 work days after arrival of down payment
Certificsate we have got :